Embedded Furniture Wireless Charger Manufacturer

Sunntc · OEM/ODM contract manufacturerMade in Shenzhen, ChinaMaking electronics since 2007

200 piecesMinimum order, from
USD 6.19A piece, from
10–30 daysLead time, working days

Your logo on any model: no tooling cost, free artwork setup, and a sample with your artwork first. Ex-works Shenzhen, T/T (bank transfer).

Questions buyers ask about these

Are you an embedded furniture wireless charger manufacturer or a supplier?

Both. Shenzhen Sunning Tension Industrial Co., Ltd. makes them in its factory in Bao'an District, Shenzhen: making electronics since 2007, the company registered in 2013. Wholesale distributors, online sellers and brands order from us direct, and brands with their own design come to us for OEM and ODM.

Can we buy furniture wireless chargers wholesale, in bulk?

Yes. Each model's minimum order is on its card, from 200 pieces on this page, and bulk prices go down by quantity: USD 6.19–29.99 a piece here, ex-works Shenzhen (EXW). Payment is by T/T (bank transfer). The lead time is 10–30 working days, by model and quantity. Send the models and quantities: the quote comes within one working day.

Do you make table embedded wireless chargers for furniture makers and hotels?

Yes: the 6 models here are built into a table, a desk or a hotel nightstand, 3 hidden under the top (STC-T10, STC-T8 and STC-T13) and 3 recessed into it (STC-T9, STC-T12 and STC-T7). Furniture makers and hotel projects order them in bulk, each model at its own minimum, from 200 pieces on this page.

How thick a desk can it charge through?

From underneath, up to 30 mm on the STC-T13; 20 mm on the STC-T10, 20 mm on the STC-T8. The recessed models charge a phone laid on them, at up to 5 mm. The cut-out and the clearance under the top are the two dimensions to check against the furniture drawing: name the model and the desktop's thickness and material in the enquiry, and confirm the fit on the sample.

What size are the built-in wireless chargers?

All 6 models here are round, 70 to 119 mm across and 14.5 to 50 mm deep: 70 × 50 mm on the STC-T9, 74 × 18 mm on the STC-T7, 96 × 14.5 mm on the STC-T10, 96 × 31 mm on the STC-T12, 99 × 22 mm on the STC-T8, 119 × 21 mm on the STC-T13. That is each charger's own size; the cut-out is made for the model you choose, checked against the furniture drawing and on the sample.

Can you print our logo on furniture wireless chargers, and what does it cost?

Yes, as OEM: your logo, artwork or slogan is printed on a model that is already tooled. Artwork setup is free. There is no tooling cost, and the minimum order is the model's own: printing a logo does not raise it. A printed sample with your artwork comes first. Your own box, insert and barcode cost USD 320 setup from 500 pieces, waived on large quantities.

More wireless chargers

Tell us what you need.

Enquiries are answered within one working day.