Magnetic Wireless Chargers

A magnet ring moulded into the charging face. It pulls the phone's receiver coil into line with the transmitter coil, which is why a magnetic pad survives being knocked and a flat pad does not. Every model in this group uses that arrangement, from a 5.4 mm pad to a folding 3-in-1 travel set.

These are Qi chargers, and Samsung Galaxy phones charge on the Qi standard, so yes. One model in the catalogue publishes its compatibility spec as 'all Qi-enabled devices'. The wattage a given phone accepts is set by the phone, not the pad, so specify the rating you need and confirm it on a sample.

Both are already running in this group, alongside ABS, PC and fabric. A material change usually means new tooling, which is quoted with the part.

They are magnetic Qi chargers: the magnet ring holds an iPhone 12 or later in place, as a MagSafe charger does, and the Qi coil charges it at the rate the phone accepts. Qi2 and Apple's Made for MagSafe are certifications of their own: a model carries one only if its own page lists it.

Yes, as OEM: your logo, artwork or slogan is printed on a model that is already tooled. Artwork setup is free. There is no tooling cost, and the minimum order is the model's own: printing a logo does not raise it. A printed sample with your artwork comes first. Your own box, insert and barcode cost USD 320 setup from 500 pieces, waived on large quantities.