Furniture Wireless Charger

Thirty millimetres, on the longest-range model in this group, which is listed as ≤30 mm transmission distance in Ø119 × 21 mm. The other distances tooled here are ≤20 mm and ≤5 mm. Transmission distance is the specification to quote to a furniture maker: the wattage is the second question, not the first.

Every product in this group carries the same 200-piece minimum, which is unusual: most groups spread from 20 to 500. It is the highest floor in the catalogue after the mouse pads, and it reflects a part that is installed rather than unboxed: the run has to cover the fitting hardware as well as the charger.

The models here are round and mount under the surface, with one pop-up type that sits through a cut hole and carries a USB port. Diameters run Ø70 to Ø119 mm and depths 14.5 to 50 mm, so the cut-out and the clearance under the worktop are the two dimensions to check against the furniture drawing.

Yes, as OEM: your logo, artwork or slogan is printed on a model that is already tooled. Artwork setup is free. There is no tooling cost, and the minimum order is the model's own: printing a logo does not raise it. A printed sample with your artwork comes first. Your own box, insert and barcode cost USD 320 setup from 500 pieces, waived on large quantities.